Home theater and whole-home audio, planned for the rooms you use.

• 25 mm (1 in) Carbon Dome tweeter
• 100 mm (4 in) Continuum cone FST midrange
• Two 130 mm (5 in) Aerofoil Profile bass drivers
• Intended for theater and stereo listening

A custom-install in-ceiling speaker. Final placement depends on ceiling structure and the room layout from a site visit.

• Uni-Q array: 200 mm (8 in) woofer and 38 mm (1.5 in) tweeter
• Frequency response 33 Hz–28 kHz (±6 dB), open-backed
• Sensitivity 90 dB; nominal impedance 4 ohms
• Recommended amplifier power 10–190 W

An in-ceiling speaker designed for home theater use, including as a front (LCR) speaker when the room calls for it.

• 1.2 in (30 mm) ceramic dome tweeter in an acoustic back chamber
• 8 in (203 mm) pivoting Kevlar/Nomex woofer
• Frequency response 34 Hz–20 kHz (±3 dB); sensitivity 91 dB
• Power handling 5 W minimum, 150 W maximum RMS; 10.125 in cutout

Sold as a pair. Part of Sonance’s current Visual Experience series (not the older Visual Performance VP86R).

• 8 in Cerametallic woofer
• 1 in titanium dome tweeter on a Tractrix horn
• Frequency response 52 Hz–23 kHz (±3 dB); sensitivity 96 dB
• SecureFit installation; round and square paintable magnetic grilles included

A flush in-ceiling speaker for distributed audio or a home theater. The installation kit is selected separately when needed.

• 6.5 in-class round in-ceiling design with round or square trim options
• Frequency response 45 Hz–20 kHz; sensitivity 89 dB
• About 8.25 in cutout and 4.92 in mounting depth
• One-stage or optional two-stage installation

Sold as a pair. A medium-size Visual Experience speaker for rooms that do not need the larger 8-inch VX86R.

• 8 in Dynamic Balance polypropylene woofer
• 1 in swivel-mount silk dome tweeter
• Total frequency response 30 Hz–27 kHz; sensitivity 90 dB; 8 ohms
• Recommended amplifier power 10–100 W per channel; paintable Sheer-Grille

A flush in-ceiling speaker suited to movies or whole-home listening. Polk notes it as a fit for Dolby Atmos and DTS:X overhead use when the layout calls for it.

• 8 in Dynamic Balance woofer
• Swivel-mounted 1 in soft-dome tweeter
• Frequency response 35 Hz–20 kHz; 8-ohm compatible
• Recommended amplifier power 20–100 W; about 9.38 in cutout and 3.25 in mounting depth

Sold as a pair. A straightforward in-ceiling option for everyday rooms or a simpler theater layout.

• 6.5 in woofer with a 1 in polymer-dome tweeter
• Sensitivity 91 dB; 8-ohm impedance
• 35 W RMS power handling
• Paintable aluminum grille; moisture-resistant design for rooms such as kitchens or bathrooms

A compact in-ceiling speaker for everyday listening or as part of a larger distributed audio plan.

• 6.5 in Dynamic Balance polypropylene woofer
• 0.75 in swivel-mount silk dome tweeter
• Total frequency response 33 Hz–27 kHz; sensitivity 89 dB; 8 ohms
• Recommended amplifier power 10–100 W; paintable Sheer-Grille

A smaller vanishing-style ceiling speaker for rooms where a slimmer, less noticeable grille is preferred.

• 11.4 channels of amplification, 140 W per channel (manufacturer rating)
• Dolby Atmos and HEOS built-in streaming
• Seven 8K HDMI inputs; Audyssey MultEQ XT32 room calibration
• Crafted in Shirakawa, Japan

A full-size home theater receiver. Speaker count, HDMI sources, and room calibration are confirmed during the walkthrough.

• 11.4 channels of amplification, 140 W per channel (manufacturer rating)
• 8K HDMI and Dolby Atmos
• Powered by HEOS for app control and streaming

Chosen when a room needs more amplified channels than a mid-range receiver provides. Final channel layout follows the speaker plan.

• 11.2-channel surround amplification
• 8K/60 and 4K/120 HDMI
• Dolby Atmos and DTS:X; SURROUND:AI processing
• YPAO room calibration and MusicCast networking

Yamaha’s AVENTAGE line is their higher-performance receiver family. Wireless surround options, if used, are planned with the speaker layout.

• 9.4 channels of amplification, 105 W per channel (manufacturer rating)
• Dolby Atmos and HEOS
• Six 8K HDMI inputs

A common planning choice for a dedicated theater that does not need the extra channels of a flagship receiver.

• 7.2-channel amplification, 100 W per channel (manufacturer rating)
• Dolby Atmos and DTS:X
• 8K/60 Hz video; six HDMI inputs (three supporting 8K) and two HDMI outputs including eARC
• HEOS streaming and Audyssey MultEQ room correction

Fits many living-room theaters. HDMI source count and speaker positions are confirmed on site.

• Class D amplification: 125 W per channel into 8 ohms
• Stereo or dual-mono output
• HDMI ARC, RCA line-in, and an adjustable subwoofer output (50–110 Hz)
• Wi-Fi plus dual Ethernet ports

Useful when a room of speakers should join a Sonos system, or as a stereo/zone amplifier rather than a full surround receiver.

• 5.2-channel amplification, 80 W (manufacturer rating, two channels driven)
• 4K/120 and 8K/60 HDMI (4 in / 1 out)
• YPAO automatic room calibration
• Wi-Fi, Bluetooth, AirPlay 2, and MusicCast

A straightforward receiver for a smaller surround system. Dolby Atmos height processing is not part of this model; the RX-V6A is the step that adds it.

• 7.2-channel amplification, 100 W (manufacturer rating, two channels driven)
• Dolby Atmos, Dolby Atmos Height Virtualization, and DTS:X
• HDMI 7 in / 1 out; Zone 2 speaker output
• YPAO with R.S.C. and multipoint measurement

The more capable model in Yamaha’s current V-series, for rooms that want height or extra surround channels without moving up to AVENTAGE.

• Discrete 7-channel amplification
• Designed for 4K or 8K video setups
• 3D audio for home theater and gaming
• Supports current HDMI specifications; HEOS app control is part of the Denon ecosystem

An entry Denon receiver for a living-room theater. Exact HDMI features and streaming options are confirmed against the current manufacturer sheet before we order.