Sample · Example home
What your written plan looks like.
After a walkthrough, you get a written plan you can review before anything is scheduled. This page shows a made-up example for a single-story home with cameras and Wi-Fi so you know what to expect. Your plan will reflect your own home.
Example only. Fictional home, no real address or client. Room layout, equipment counts and timeline are illustrations, not a quote.
1 · Floor sketch
Camera spots, Wi-Fi and cable runs.
A simple sketch marks each device and shows where cable runs back to a central network closet.
- C1–C4: exterior cameras
- D: video doorbell
- AP1–AP2: ceiling Wi-Fi access points
- Network closet (switch, gateway, recorder)
- Cable runs
2 · Equipment list
What goes in, by type.
Models are confirmed with you; the plan lists each type and quantity so nothing is a surprise.
| Item | Qty | Where | Notes |
|---|---|---|---|
| 4K PoE turret camera | 4 | C1–C4 (corners of the home) | Infrared night vision; privacy masks where a view includes a neighbor’s property |
| Wired video doorbell | 1 | Front door (D) | Audio settings reviewed at handoff |
| Wi-Fi 7 ceiling access point | 2 | Living room (AP1), office hallway (AP2) | Wired Ethernet backhaul |
| Managed PoE switch, 16-port | 1 | Network closet | Powers cameras and access points; power budget checked |
| Gateway / controller | 1 | Network closet | Routes the home network; hosts management apps |
| Network video recorder with storage | 1 | Network closet | Storage sized for the number of days of video you want to keep |
| Cat6 cable, wall plates, patch panel | — | Each run | Every run labeled at both ends |
3 · Scope of work
What we will do.
Written in plain language so you can check it line by line.
- Run and terminate 7 Cat6 cables from the network closet to each camera, doorbell and access point location.
- Mount and aim 4 exterior cameras; set motion zones and privacy masks.
- Install the video doorbell on the existing doorbell wiring or a new low-voltage run.
- Install 2 ceiling access points and configure one Wi-Fi network with a separate guest network.
- Install the switch, gateway and recorder in the closet; label the patch panel.
- Patch and seal wall openings we create; clean up the work area each day.
- Not included in this example: drywall painting, internet service, electrical (line-voltage) work.
4 · Timeline
The order things happen.
Example timing; your plan lists dates once you approve it.
- Step 1
Plan approved
You review the plan and quote and tell us to go ahead.
- Step 2
Cabling day
Cable runs pulled, labeled and terminated.
- Step 3
Devices & setup
Cameras, doorbell, access points and closet equipment installed and configured.
- Step 4
Test & handoff
Everything tested, then we walk you through it.
5 · Handoff checklist
What we go over before we leave.
We check each item off with you.
- Each camera view reviewed with you, including night view and privacy masks.
- Camera and doorbell app installed on your phone; you can view live and recorded video.
- Doorbell and camera audio settings reviewed (see our California camera rules guide).
- Wi-Fi tested in every room on the plan; network names and passwords handed to you.
- Admin accounts set up in your name with two-factor sign-in.
- Labeled cable map and equipment list left with you.
- How to reach us for help: tech support (323) 246-0549.
Your home
Want a plan like this for your home?
It starts with a free walkthrough. Nothing is scheduled until you have reviewed the written plan.